{Stus-List} Genoa Track Question

Colin Beckmann alchemist1 at rogers.com
Sun Feb 11 07:11:53 EST 2007


David,

I had heard of number 3 tracks ripping right out of the coach house 
when only installed with washers.   You can use teak battens to cover 
the holes.  Once they are installed, no one will even look twice at them.

Colin

At 11:51 PM 2/10/2007, you wrote:

>The issue is trying to avoid cutting away more of the headliner to 
>get the plate in against the inner skin of deck...looks like I best 
>suck it up, cut it up and cover more of it up...
>
>Thanks
>
>From:  "Dennis C." <captbuy at yahoo.com>
>Reply-To:  cnc-list at cnc-list.com
>To:  cnc-list at cnc-list.com
>Subject:  Re: {Stus-List} Genoa Track Question
>Date:  Sat, 10 Feb 2007 19:24:30 -0800 (PST)
>
>David,
>
>
>
>You didn't say what your issue was.  If it's the nuts showing, 
>consider using barrel nuts.  Stay with the backing plate.  The loads 
>on the #3 and #4 are substantial.  I covered the the backing plate 
>and nuts for my blade track with a teak cover.  If I had it to do 
>again, I'd use barrel nuts for a thinner cover.
>
>
>
>Dennis C.
>
>Touche' 35-1 #83
>
>Mandeville, LA
>
>David Risch <davidrisch75 at msn.com> wrote:
>
>
>
>I am installing inboard tracks (for the # 3 & 4) on my the cabin 
>trunk.   Ideally I would like to back it with the 1 1/2" backing 
>bar.  However, it is proving more difficult than expected (big 
>surprise) and I am contemplating using 1 1/2" backing washers.
>
>
>
>Any experience using washers in this application?  Thanks in advance.
>
>
>
>David Risch
>
>Corsair 1981 40'
>_______________________________________________
>CnC-List mailing list
>CnC-List at cnc-list.com
>http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
>Everyone is raving about 
><http://us.rd.yahoo.com/evt=45083/*http://advision.webevents.yahoo.com/mailbeta>the 
>all-new Yahoo! Mail beta.
>
> >_______________________________________________
> >CnC-List mailing list
> >CnC-List at cnc-list.com
> >http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>_______________________________________________
>CnC-List mailing list
>CnC-List at cnc-list.com
>http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20070211/81b5f6d3/attachment.html 


More information about the CnC-List mailing list