{Stus-List} Fitting a Holding Tank on a C&C 27

rspence7 rspence7 at cox.net
Thu Mar 1 07:51:05 EST 2007

Coupla holes shouldn't be any problem, as long as you cut them into the bulkhead a few inches away from the hull.  You don't want to compromise the fiberglass tabbing bonding the bulkhead/hull.

  ----- Original Message ----- 
  From: Lawrence Ricci 
  To: cnc-list at cnc-list.com 
  Sent: Wednesday, February 28, 2007 10:42 PM
  Subject: {Stus-List} Fitting a Holding Tank on a C&C 27

  I got a good tip on holding tank location from this list~ put  it under the port side seat .  the 1`4 Gallon Nauta membrane tank fits like a dream and hose runs are only  2 or three feet.


  Question- the bulkhead between cabin and head seems to be structural.  Should we expect problems with two Inch and a half holes?   I assume a normal hole cutter should  manage cutting these.


  Any thoughts?


  Lawrence Ricci
  Yardhand on "Options"


  CnC-List mailing list
  CnC-List at cnc-list.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20070301/234a354a/attachment.html>

More information about the CnC-List mailing list