{Stus-List} Winch Maintenance

Bob Moriarty bobmor99 at gmail.com
Thu Mar 4 16:10:23 CST 2010


Wow Dennis.
You must stay at a Holiday Inn Express.   :)
--Bob
P.S.
In case the folks way up North haven't seen Holiday Inn Express commercials,
they feature characters who display amazingl acumen - presumably because
they got a great night's rest at a Holiday Inn Express.


On Mon, Mar 1, 2010 at 7:07 PM, Dennis C. <captbuy at yahoo.com> wrote:

> Bob,
>
> Strange coincidence.  I was pulling apart a pair of 26's yesterday.  Going
> to clean and lube them for eBay.
>
> It's easy.  Here's how you do it (assuming you've removed the bolts).  Look
> at the upper gear housing and you'll see the 7 bolt holes and a small guide
> pin between two of the bolt holes.  Carefully insert the blade of a 6 in 1
> knife (carpenter's tool) between the upper gear housing (2) and the lower
> gear housing (1) at one of the bolt holes on either side of the gear spindle
> (3).  Carefully tap the tool with a hammer and the two gear housings should
> begin to separate.  Move the tool to the other side of the gear spindle and
> do the same.  Work back and forth and the upper gear housing should lift off
> the lower gear housing.
>
> You will now be able to service the pawls.  Remember - OIL the pawls.  Do
> NOT grease the pawls.
>
> And a BIG thank you to Stu for having such a good winch reference site.
>
> Dennis C.
> Touche' 35-1 #83
> Mandeville, LA
>
>
>  ------------------------------
> *From:* Bob Moriarty <bobmor99 at gmail.com>
> *To:* cnc-list <cnc-list at cnc-list.com>
> *Sent:* Mon, March 1, 2010 9:36:29 AM
> *Subject:* {Stus-List} Winch Maintenance
>
> I got stuck yesterday on step 7 while trying to service my Barient-26
> winches.
>
> "7. Using lock-in handle, remove upper gear housing from lower gear housing
> (#1)...."
>
> http://www.cncphotoalbum.com/winches/winches8.htm
>
> What's a lock-in handle?
>
> Thanks in advance,
>
> Bob Moriarty
> Ox '76 33-1
> Jax, FL
>
>
>
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List at cnc-list.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20100304/479463df/attachment.html>


More information about the CnC-List mailing list