{Stus-List} Sikaflex 295UV uses

Morgenstern, Keith E CIV SEA 08 NR keith.morgenstern at navy.mil
Mon Mar 15 16:02:06 EDT 2010


I don't suppose after you are done in St. Michaels, you can drop it off
for a pit stop in Deale, MD?


-Keith 


-----Original Message-----
From: Gary Nylander [mailto:gnylander at atlanticbb.net] 
Sent: Friday, March 12, 2010 10:57 AM
To: cnc-list at cnc-list.com
Subject: Re: {Stus-List} Sikaflex 295UV uses

Bill, I found out that Faucett's doesn't carry Sika any longer, so am 
interested in your offer.

I'll get a couple of tubes of glue from Jamestown Dist.

I am at
104 Cherry St. or PO Box 448 (they don't deliver mail here)
St. Michaels, MD 21663
410-310-0929
Please give me a call and we can work out the details.
Thanks, Gary Nylander

----- Original Message ----- 
From: "Bill Coleman" <coltrek at verizon.net>
To: <cnc-list at cnc-list.com>
Sent: Monday, March 08, 2010 6:06 PM
Subject: Re: {Stus-List} Sikaflex 295UV uses


> Gary -
> I can send you my bottle of 209 down and you can use what you need and

> drop
> it off at my daughters in Baltimore when you are done.
>
> Bill Coleman
> C&C 39
>
>
> -----Original Message-----
> From: cnc-list-bounces at cnc-list.com
[mailto:cnc-list-bounces at cnc-list.com]
> On Behalf Of Graham Collins
> Sent: Monday, March 08, 2010 5:00 PM
> To: cnc-list at cnc-list.com
> Subject: Re: {Stus-List} Sikaflex 295UV uses
>
> Hey Gary
> It's true the tube of 295 is cheaper, but you will need more than one
> tube, you only need the one primer.  And it's only $55 at Noah's.
> What's your time worth?
>
> - Graham
>
> Gary Nylander wrote:
>
>> I need to re-bed my 30-1 windows. In past posts, the two most
favorite
>> adhesives seem to be Plexus and Sikaflex. Has anybody used Sikaflex
>> without the primer? I find it absurd that one can buy a tube of 295UV
>> for around $20 and the primer costs over $70!
>>
>> Gary Nylander
>>
>> ----- Original Message ----- From: "Joe Phaneuf" <joe at hpcareer.net>
>> To: <cnc-list at cnc-list.com>
>> Sent: Sunday, March 07, 2010 6:26 PM
>> Subject: Re: {Stus-List} Fw: re-bedding handrails on '75 C&C 33
>>
>>
>>> I think Dave Ryan was talking about these:
>>> http://www.teakflex.com/hand.html  which I installed on my Landfall
a
>>> couple of years ago. Easy installation, read: NO NEW HOLES. And with
a
>>> few coats of Cetol look very "Bristol" to me.
>>> Joe
>>> Landfall 38 #122
>>>
>>> On Thu, Mar 4, 2010 at 9:35 AM, Ross MacLennan & Bev DeJong
>>> <rmaclennan at accesscomm.ca> wrote:
>>>
>>>>
>>>> ----- Original Message -----
>>>> From: Ross MacLennan & Bev DeJong
>>>> To: cnc-list at cnc-list.com
>>>> Sent: Thursday, March 04, 2010 12:12 AM
>>>> Subject: Re: {Stus-List} re-bedding handrails on '75 C&C 33
>>>> I've tried several different things . For example I used 3M- 4200
>>>> and had
>>>> reasonable luck for several years and I think the 4200 helped to
>>>> keep the
>>>> rails tight.
>>>>
>>>> But this last time I used butyl tape because It seems to still be
>>>> the best
>>>> for stopping leaks and also holds well but not as well as 4200.
>>>>
>>>> It's really a guessing game but in your case because your rails are
>>>> bolted
>>>> together right through the roof I don't think you need to worry
>>>> about an
>>>> adhesive . you're most concerned with stopping all leaks and so I
>>>> considering butyl tape.
>>>>
>>>> Ross MacLennan
>>>> C&C 24, Tobermory
>>>>
>>>> ----- Original Message -----
>>>> From: Michael Beers
>>>> To: cnc-list at cnc-list.com
>>>> Sent: Wednesday, March 03, 2010 3:02 PM
>>>> Subject: {Stus-List} re-bedding handrails on '75 C&C 33
>>>> Hello listers,
>>>>
>>>> My handrails leak badly and I'm about to pull them off and attempt
to
>>>> re-bed. The deck handrail seems to be fastened to a matching
interior
>>>> handrail via a long machine screw. I'm a bit concerned that I'll
get
>>>> started
>>>> on this job and then find out that someone put some 5200 on
there...
>>>>
>>>> I'm sure there is a lot of variation in how these are installed, so
I'm
>>>> hoping to find another 33 mk1 owner who has been down this road
>>>> before. Can
>>>> anyone offer any guidance?
>>>>
>>>> Thanks,
>>>> Michael
>>>> C&C 33 mk1
>>>> "Exit Strategy"
>>>>
>>>> ________________________________
>>>>
>>>> _______________________________________________
>>>> This List is provided by the C&C Photo Album
>>>> http://www.cncphotoalbum.com
>>>> CnC-List at cnc-list.com
>>>>
>>>> _______________________________________________
>>>> This List is provided by the C&C Photo Album
>>>> http://www.cncphotoalbum.com
>>>> CnC-List at cnc-list.com
>>>>
>>>>
>>>
>>> _______________________________________________
>>> This List is provided by the C&C Photo Album
>>> http://www.cncphotoalbum.com
>>> CnC-List at cnc-list.com
>>>
>>
>>
>>
>> _______________________________________________
>> This List is provided by the C&C Photo Album
>> http://www.cncphotoalbum.com
>> CnC-List at cnc-list.com
>>
>
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List at cnc-list.com
>
>
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List at cnc-list.com
> 








More information about the CnC-List mailing list