{Stus-List} Mattress Toppers

Della Barba, Joe Joe.Della.Barba at ssa.gov
Sun Mar 28 20:35:23 CDT 2010


I have one – LOVE IT ☺

Joe Della Barba


From: cnc-list-bounces at cnc-list.com [mailto:cnc-list-bounces at cnc-list.com] On Behalf Of Alan Bergen
Sent: Sunday, March 28, 2010 8:59 PM
To: cnc-list at cnc-list.com
Subject: Re: {Stus-List} Mattress Toppers

I had one made several years ago, and I recommend it.  Check out their web site at www.tuftedtopper.com.

Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR

----- Original Message -----
From: "David Risch" <davidrisch75 at msn.com>
To: cnc-list at cnc-list.com
Sent: Sunday, March 28, 2010 5:50:03 PM GMT -08:00 US/Canada Pacific
Subject: {Stus-List} Mattress Toppers

All,

In lieu of buying a real mattress what have mattress toppers/foam pads have folks found to work well in the V- Berth given cost, moisture and comfort...

As always...thanks in advance
David F. Risch
(401) 419 4650 cell



________________________________
Date: Sun, 28 Mar 2010 10:56:40 -0700
From: sailindigo at yahoo.com
To: cnc-list at cnc-list.com
Subject: Re: {Stus-List} A vital question for CnC Listers...
Yes. Yes you can!

--- On Sun, 3/28/10, Michael Poulter <mopoulter at sympatico.ca> wrote:

From: Michael Poulter <mopoulter at sympatico.ca>
Subject: Re: {Stus-List} A vital question for CnC Listers...
To: cnc-list at cnc-list.com
Date: Sunday, March 28, 2010, 1:20 PM

That’s 16 drinks can I party on your boat too?



Mike P



From: cnc-list-bounces at cnc-list.com [mailto:cnc-list-bounces at cnc-list.com] On Behalf Of Richard Walter
Sent: March 28, 2010 10:29 AM
To: wal at wbryant.com; cnc-list at cnc-list.com
Subject: Re: {Stus-List} A vital question for CnC Listers...



Greetings,

For what may be the first time, I actually have a solution that I think is a GOOD one. I have a teak 4-drink (or two and a binocular) holder mounted on the pedestal. AND...I bought six (really, SIX) more teak 2-drink holders. I mounted plastic clips on the backs of the 2-drink holders and they live below. I can clip them on any acceptable tubing at will. I use them below when I am bar-tendering in the galley. I clip them to the pedestal when there is a need to hold more drinks than the 4-drink holder will accommodate. They are quite useful.  In my humble opinion, BRILLIANT!

Richard

--- On Sat, 3/27/10, Wally Bryant <wal at wbryant.com> wrote:

From: Wally Bryant <wal at wbryant.com>
Subject: Re: {Stus-List} A vital question for CnC Listers...
To: cnc-list at cnc-list.com
Date: Saturday, March 27, 2010, 12:30 AM

You wrote:
> What kind of drink holders work best for you in the cockpit?  I have been
> getting along putting them in my binoc case and a PO fold-down plastic
> contraption of which I am getting tired.

David --

The answer is: Lots of drink holders is best.

I have a half dozen of the starboard things, attached to every stanchion and
pedestal mounting spot.   I also have six pairs of these really cool cargo
shorts with a special elastic pocket in the back just to hold a can or
bottle.

There's nothing worse than spilling a beer.  I mean, there's no use crying
of spilled beer, but it makes you feel better.

Wal


_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List at cnc-list.com




-----Inline Attachment Follows-----
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List at cnc-list.com<about:blank>



_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List at cnc-list.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20100328/632c3124/attachment.html>


More information about the CnC-List mailing list