{Stus-List} live and learn

dwight veinot dwightveinot at hfx.eastlink.ca
Thu Sep 22 13:24:08 EDT 2011


Dennis

 

What is a kellet?  How do you put this on an anchor rode and for what
purpose?

 

D. Veinot

C&C 35 MKII, Alianna

Head of St. Margaret's Bay, NS

  _____  

From: cnc-list-bounces at cnc-list.com [mailto:cnc-list-bounces at cnc-list.com]
On Behalf Of Dennis C.
Sent: September 22, 2011 1:48 PM
To: cnc-list at cnc-list.com
Subject: Re: {Stus-List} Request for ideas

 

I am completely unfamiliar with pier systems anchor with chains.  I was on
one once in Charleston and stayed in a Holiday Inn Express so I'm an expert.
:)

 

Anyway, can you use a double moor system where you run a long chain between
2 moorings (concrete, whatever) then run chains from the piers down to the
chain between the mooings?  You would still have the vertical rise for the
tides but clearance for boats to pass close to the piers.  Similar to a
putting a kellet on an anchor rode.

 

Dennis C.

 


  _____  


From: Bill Connon <billconnon at globetrotter.net>
To: cnc-list at cnc-list.com
Sent: Thursday, September 22, 2011 11:30 AM
Subject: Re: {Stus-List} Request for ideas

Della Barba, Joe wrote:
> You might look into helix moorings instead of concrete.
> As I discovered when making a mooring, concrete loses half its weight in
water and does not hold all that well.
> Is there a reason you can't drive pilings?
>
> Joe Della Barba
>
>    
Joe,

In most areas of the marina helix moorings would not work. There is not 
enough mud/sand etc. over the bedrock.
Pilings cannot be used because of ice and tide. At low tide the ice 
forms around the piling and as the tide rises the pilings are hauled out.

Bill

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List at cnc-list.com



  _____  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1410 / Virus Database: 1520/3912 - Release Date: 09/22/11

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20110922/4c247925/attachment-0002.html>


More information about the CnC-List mailing list