Stus-List VariProp Question

Jim Watts paradigmatism at gmail.com
Sat May 11 11:18:15 EDT 2013


You could check out Lubriplate 130 AA, it's the grease recommended for Max
Props and is available from PYI if you can't find it locally.


On 11 May 2013 05:12, <sbrown at accesswave.ca> wrote:

> HI Steve, just completed a frantic search for this grease (as boat went in
> yesterday) and it's very hard to find as it comes from Germany. Found some
> at the VariProp distributor in Rode Island but it's expensive. If you want
> further info let me know.
>
> Scott
> C&C 35 Mk III
> Bedford NS
>
> -----Original Message----- From: OldSteveH
> Sent: Friday, May 10, 2013 3:51 PM
> To: cnc-list at cnc-list.com
> Subject: Re: Stus-List VariProp Question
>
>
> Ok, I think I figured it out - Extreme Pressure / Salt water
>
> DG sails in fresh water - does that mean any EP grade grease is suitable or
> is there a marine grade I should be using?
>
> Thanks,
>
> Steve
>
> -----Original Message-----
> From: OldSteveH [mailto:oldsteveh at sympatico.ca**]
> Sent: May-10-13 1:42 PM
> To: 'cnc-list at cnc-list.com'
> Subject: RE: VariProp Question
>
> Can anyone recommend a commonly available grease for my 2 blade variprop?
>
> The manual calls for an 'EP/SAL' grade hydrophobic grease.
>
> I cannot find any reference to this grease specification on the internet.
>
> Thanks,
>
> Steve Hood
> S/V Diamond Girl
> C&C 34
> Lions Head ON
>
>
>
>
> ______________________________**_________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List at cnc-list.com
>
> ______________________________**_________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List at cnc-list.com
>



-- 
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20130511/0adb5223/attachment.html>


More information about the CnC-List mailing list