Stus-List Yanmar questions for all you experts

Graham Collins cnclistforward at hotmail.com
Thu May 14 16:37:15 EDT 2015


Hi Mike
I meant as a DIY project...  there are not a lot of parts in one of 
those.  But you could also try DAC or one of the others, I'm sure they 
would be OK with rebuilding it.  The only part that might be iffy is 
pressing in a new bearing.

Graham Collins
Secret Plans
C&C 35-III #11

On 2015-05-14 9:22 AM, Hoyt, Mike via CnC-List wrote:
>
> Thanks Graham
>
> Who does the rebuild of these?  It sounds like a faster and simpler 
> solution
>
> Mike
>
> *From:*CnC-List [mailto:cnc-list-bounces at cnc-list.com] *On Behalf Of 
> *Graham Collins via CnC-List
> *Sent:* Wednesday, May 13, 2015 9:35 PM
> *To:* cnc-list at cnc-list.com
> *Cc:* Graham Collins
> *Subject:* Re: Stus-List Yanmar questions for all you experts
>
> Hi Mike!
> Were it mine I'd rebuild it first - my engine is raw water cooled and 
> started dripping, took a couple of seals and not a lot of work to get 
> it right.
>
> For parts as has been noted Rosborough is the official marine dealer 
> currently.  If you are around Burnside you could try Liftow, they are 
> no longer the dealer but may have some bits left.  They are up at the 
> top of Wright Ave, up the hill coming up from the harbor.   Another 
> possibility is DAC Industrial, they used to be a Yanmar industrial 
> dealer but got busted selling marine parts when they were not supposed 
> to. They may also have some old stock, I got a gasket and a belt from 
> them last season.
>
> The Marine diesel direct site is great for diagrams and info, it 
> annoys the heck out of me that they can't sell out of their region.
>
> Graham Collins
> Secret Plans
> C&C 35-III #11
>
> On 2015-05-13 11:25 AM, Joel Aronson via CnC-List wrote:
>
>     Try here:
>
>     http://www.marinedieseldirect.com/catalogs/catalog_group.php?owner=mdd&page_ident=Y00F5062-34&model=3GM30F&manufacturer=Yanmar&title=COOLING%20FRESH%20WATER%20PUMP&quant_position=4&catalog=Y00F5062&printparts=&printservice=&printoperators=&comment1=
>
>     The answer is always "the more expensive one!"
>
>     Joel
>
>     On Wed, May 13, 2015 at 10:12 AM, Hoyt, Mike via CnC-List
>     <cnc-list at cnc-list.com <mailto:cnc-list at cnc-list.com>> wrote:
>
>     Engine: Yanmar 3GM30F
>
>     Have come across two part numbers at different costs.
>
>     1.128695-42010 “Cooling Fresh Water Pump” .  Generally selling for
>     around $270 USD
>
>     2.121000-42100 “Fresh Water Pump Assembly”.  Selling $176.95 CAD
>     at boat house
>
>     Is the second a component of the first?  Anyone know the
>     difference and which is needed to be replaced when the seals start
>     to go resulting in the leak from weeping port?
>
>     Mike
>
>     Persistence
>
>     Halifax
>
>
>     _______________________________________________
>
>     Email address:
>     CnC-List at cnc-list.com <mailto:CnC-List at cnc-list.com>
>     To change your list preferences, including unsubscribing -- go to
>     the bottom of page at:
>     http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
>     -- 
>
>     Joel
>     301 541 8551
>
>
>
>
>     _______________________________________________
>
>       
>
>     Email address:
>
>     CnC-List at cnc-list.com  <mailto:CnC-List at cnc-list.com>
>
>     To change your list preferences, including unsubscribing -- go to the bottom of page at:
>
>     http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>       
>
>
>
> _______________________________________________
>
> Email address:
> CnC-List at cnc-list.com
> To change your list preferences, including unsubscribing -- go to the bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20150514/54aa25eb/attachment-0002.html>


More information about the CnC-List mailing list