Stus-List PVC Handrails, 12" On Center
captbuy at gmail.com
Wed Aug 9 11:54:17 EDT 2017
I used Whitewater for SS handrails on a J30. Turned out great.
Just have to be VERY careful about measuring and sending them old ones.
Your old rails may be both curved and crowned. They may "unflex" a bit
once you remove them. Like Josh says, templates for the curve AND the
crown will help.
Touche' 35-1 #83
On Wed, Aug 9, 2017 at 10:27 AM, Josh Muckley via CnC-List <
cnc-list at cnc-list.com> wrote:
> Many of us have gone with stainless steel handrails. I had mine custom
> made by whitewatermarine.com they turned great. If you remove the old
> ones first and send them with a cardboard template of each side you can
> better guarantee the results. I don't think I have any pictures but will
> probably be able to get some a little later today.
> Josh Muckley
> S/V Sea Hawk
> 1989 C&C 37+
> Solomons, MD
> On Aug 9, 2017 11:06 AM, "Bruce Whitmore via CnC-List" <
> cnc-list at cnc-list.com> wrote:
>> Hello all,
>> I'm looking for someone to correct me if I'm going down a bad path...
>> Our 1994 C&C 37/40+ has grayed out teak grab rails, 12' on center with 6
>> We're in Florida, where sun likes to strip varnish away with ruthless
>> abandon, and the boat has a sleek, modern look on the outside anyway. I am
>> thinking about doing away with the teak rails and going with either
>> stainless handrails or, I see that I can get white PVC rails from Hamilton
>> Marine for about $160 apiece.
>> I'm kind of thinking it might be hard to have really sleek looking
>> stainless ones made which would easily mount through the existing holes in
>> the deck...
>> Anyone here have any experience with PVC handrails?
>> Thanks for the insights,
>> Bruce Whitmore
>> (847) 404-5092 (mobile)
>> bwhitmore at sbcglobal.net
>> This list is supported by the generous donations of our members. If you
>> wish to make a contribution to offset our costs, please go to:
>> All Contributions are greatly appreciated!
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> All Contributions are greatly appreciated!
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the CnC-List