Stus-List New (old) C&C 35 Mk I - Water Ingress

Dennis C. captbuy at gmail.com
Sun Feb 12 22:42:18 EST 2017


Tom,

1.  Don't get carried away tightening toe rail fasteners.  You could
squeeze out too much butyl rubber and cause the leakage to increase.  I
apply several applications of Captain Tolleys Creeping Crack Cure to the
toe rail/deck interface every spring.  Seems to keep leaks there at bay.

2. Touché's mast has Spartite sealed with gray silicon self fusing tape.
No leakage whatsoever.  Pics can be seen here:

https://drive.google.com/folderview?id=0B_sb5TfIENvsaHF0RTBxZDFla1k

Dennis C.
Touche' 35-1 #83
Mandeville, LA


On Feb 12, 2017 8:14 PM, "Thomas Delaney via CnC-List" <
cnc-list at cnc-list.com> wrote:

Randy, Neil, Bill,

Thank you all for the advice. I've marked the hull with a washable marker
and will check for water next weekend. The mast is in, and it hadn't
crossed my mind that the water was coming through it. I'll add replacing
the mast boot and installing a garboard drain to my list of projects.

Thanks again,
Tom

---
Snow Goose
C&C 35 Mk I
City Island, NY

_______________________________________________

This list is supported by the generous donations of our members. If you
wish to make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20170212/9086e5fe/attachment-0003.html>


More information about the CnC-List mailing list