Stus-List Baby stay vs Cunningham?

Hoyt, Mike Mike.Hoyt at impgroup.com
Thu May 18 08:59:47 EDT 2017


And bending mast would also open leech

From: CnC-List [mailto:cnc-list-bounces at cnc-list.com] On Behalf Of Josh Muckley via CnC-List
Sent: Thursday, May 18, 2017 9:52 AM
To: cnc-list at cnc-list.com
Cc: Josh Muckley
Subject: Re: Stus-List Baby stay vs Cunningham?


Cunningham does flatten the sail but simply due to luff tension.

If a baby stay is able to pull the belly of the mast forward then the luff is also pulled forward and the resulting shape of the sail is flatter.

Josh

On Thu, May 18, 2017, 8:18 AM Hoyt, Mike via CnC-List <cnc-list at cnc-list.com<mailto:cnc-list at cnc-list.com>> wrote:
Doesn't the cunngham assist the halyard in moving draft forward?

-----Original Message-----
From: CnC-List [mailto:cnc-list-bounces at cnc-list.com<mailto:cnc-list-bounces at cnc-list.com>] On Behalf Of Dave S via CnC-List
Sent: Wednesday, May 17, 2017 10:43 PM
To: C&c Stus List
Cc: Dave S
Subject: Stus-List Baby stay vs Cunningham?

Both depower the main....  Does the adjustable baby stay (mast bend) make the Cunningham (luff tension) redundant?
I have an adjustable baby stay, is adding a Cunningham a waste of time?

Thanks , Dave
33-2

Sent from my iPhone
_______________________________________________

This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to:  https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

_______________________________________________

This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to:  https://www.paypal.me/stumurray

All Contributions are greatly appreciated!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20170518/9b59dbdf/attachment-0002.html>


More information about the CnC-List mailing list