Stus-List Unique 3 way wire connector

Rick Rohwer rickrohwer at gmail.com
Fri May 26 14:03:27 EDT 2017


bravo, nice idea!

On Thu, May 25, 2017 at 3:05 PM, Dennis C. via CnC-List <
cnc-list at cnc-list.com> wrote:

> Had a situation where I wanted to connect two wires twisted and soldered
> together with two smaller individual wires.  The individual wires could use
> a 14-16 connector but the twisted wires needed a 10-12 connector.
>
>  Aha!  I grabbed two 14-16 #10 ring connectors and a 10-12 #10 ring
> connector and riveted them together with a 3/16 inch 1/4 inch grip aluminum
> rivet.  Everything got smeared with TefGel since the rivet wasn't tinned
> marine grade.  Voila, a 3 way connector with two 14-16 connectors and one
> 10-12 connector.
>
> https://drive.google.com/open?id=0B_sb5TfIENvseWVpb0h0WUVvVnc
>
> Yeah, I could have used a couple of 10-12 butt connectors and twisted
> wires together and folded wires over but that's not how we roll on
> Touche'.  Could have also used a piggy back quick disconnect.
>
> Dennis C.
>
> _______________________________________________
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
>
> All Contributions are greatly appreciated!
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20170526/39c54a8b/attachment-0002.html>


More information about the CnC-List mailing list