The rudder on our C&C 37 is very stiff. I suspect the grease in the rudder
post is old and thickened, does anyone have a suggestion on how to address
this problem in the water?
There is a zerk fitting on the rudder post. I'm considering putting in some
kind of thinner oil, and then pushing in new grease. I disconnected the
cables on the steering quadrant, the helm was easy to turn after that and I
was unable to turn the rudder by hand.
Ryan
In addition to what Chuck says, Maybe check your quadrant, sometimes the
Rudder can slip down - see if it may be rubbing on the top of the housing -
or maybe on the top bearing, if there is one.
Bill Coleman
On Wed, Apr 17, 2024 at 11:11 AM Ryan Anderson via CnC-List <
cnc-list@cnc-list.com> wrote:
The rudder on our C&C 37 is very stiff. I suspect the grease in the rudder
post is old and thickened, does anyone have a suggestion on how to address
this problem in the water?
There is a zerk fitting on the rudder post. I'm considering putting in
some kind of thinner oil, and then pushing in new grease. I
disconnected the cables on the steering quadrant, the helm was easy to turn
after that and I was unable to turn the rudder by hand.
Ryan
Please show your appreciation for this list and the Photo Album site and
help me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu
Can anyone provide the dimensions of the bunk in the fore cabin of a C&C 41? Considering looking at this model to purchase but wanted to be sure there’s enough room to fit! I’m 6’ 1”
Thanks